Description
The Accusump Turbo After-Oiler solves the main cause of Turbo wear and failure by supplying a pressurized discharge of oil to the hot turbo bearings during turbo spool down. This oil will lubricate and cool the bearings and prevent coke build up (which limits oil flow). Manufactured with the same design features and to the same high standards as all Accusumps. A piston separates the oil side from the air pressure side which allows the the unit to be mounted in any position and permits an air precharge. With a precharge all the oil is discharged under pressure for positive oiling and no oil is diverted from the engine until pressure is established on restart. The Turbo After-Oiler is easy to install and is virtually maintenance free.
Additional Attributes:
GTIN: 00887753716712
Feature 1: Solves the main cause of turbo wear and failure by supplying a pressurized discharge of oil to the hot turbo bearings during turbo spool down
Feature 2: Made In USA
Feature 3: Oil lubricates and cools the bearings to prevent coke build up which limits oil flow
Feature 4: 1-quart body is 3-1/4″ diameter and 12″ long for large turbo with high oil demand; Unit can be mounted in any position
Feature 5: Easy to install and is virtually maintenance free
Recommended Accessory 1: 24-550 – 1/4″ Compression Fittings for Steel Turbo Oil Feed Lines 2 Per Package
Recommended Accessory 2: 24-551 – 5/16″ Compression Fittings for Steel Turbo Oil Feed Lines 2 Per Package
Recommended Accessory 3: 24-552 – 3/8″ Compression Fittings for Steel Turbo Oil Feed Lines 2 Per Package
Extended Information:
Emissions : CARB Eligible
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 32 x 5.5 x 5.5 inches
Weight: 6.4 PG
TURBO_OILER NEW
Reviews
There are no reviews yet.