Home > Shop > THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, DOM. HOLLEY 4500
THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, DOM. HOLLEY 4500
THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, DOM. HOLLEY 4500

THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, DOM. HOLLEY 4500

Code: BGWS-TS5

THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, DOM. HOLLEY 4500

  • Fits Holley Dominator (4500 style) and King Demon carburetors.
  • The Quality of a Dedenbear Bear Stop is obvious. Self-compensating for wear, regardless of age. 1pc aluminum casting prevents vacuum leaks, misalignment, distortion or loose parts commonly foun in welded or bolted together throttle stops
  • Indexed stop bolt makes adjustments simple, precise and repeatable.
  • All electrical components are self-contained within the sealed, one-piece solenoid which opens and closes instantaneously, yet draws only 1 amp at wide open throttle!
  • Stainless steel butterflies are bolted to a ground stainless steel shaft actuated by levers which are TIG welded to the throttle shaft, preventing any possibility of loosening.
  • Optional primary butterfly kits, sold separately, allow for even greater control in high horsepower applications by allowing the stop to control air/fuel flow on all four barrels.

$697.84

In Stock
1-4 days Delivery
100% Original and quality
Extended Warranty
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Dedenbears Bear Stop Base Plate Throttle Stops Sit Underneath The Carburetor And Operate A Second Set Of Butterflies To Limit Air/Fuel Flow While Allowing The Carburetor To Remain In Wide Open Position In Order To Help Assist A Drag Car In An Electronics Class Precisely Dial In To A Pre-Determined Et (Such As Super Classes) Or To Aid In Running A Higher Mph For A Given Et. Typically Used With A Throttle Stop Timer, There Are Two Actuating Methods Available Offering Options For Improved Simplicity And Consistency Or Maximum Tunability. Electric Solenoid Stops Are Simple, Consistent, Reliable And Work For A Majority Of Applications. Co2 Or Air Stops Offer A Tunable Flow Rate, Allowing Greater Control Over The Stop Butterfly Open Rate (And In Dual-Acting Models Which Offer Control Over Close Rates As Well!), Reducing The Likelihood Of Spinning The Tires On A High Powered Car When You Transition Back Off The Stop During A Run.

Additional Attributes:

GTIN: 00046074165252
Add-On: L1;L2;CC3;TSC2A;PK5;TS5A;TS5AD;STSK;2163;BEX-5000;2159;2172;2183
Prop 65 – Short Label: Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov.
Prop 65 – Warning Label: Warning.png
Prop 65 (C, R or CR): C
Prop 65 Yes/No: Y

Extended Information:

Emissions : Released
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 13 x 15 x 4 inches
Weight: 8.15 PG

PDF:

Additional information

Weight 3.7 kg
Dimensions 13 × 15 × 4 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

  • THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16in BORE)
    • THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16in BORE)
    • THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16in BORE)
    • THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16in BORE)
    Throttle Stop

    THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16in BORE)

    THROTTLE STOP, DISC TYPE, DOM. HOLLEY 4500 (2-1/16" BORE)

    • Designed specifically for the highest mile per hour cars.
    • Fits Holley Dominator (4500 style) and King Demon carburetors. 2″ bore size, suitable for most applications.
    • No Butterflies To Restrict Flow Or Horsepower.
    • CO2 operation, includes premium 4 way solenoid, fittings, and 1/4 inch line required for installation.
    • Needle roller bearings used on all moving parts for exceptionally smooth actuation.
    • Air On / Air Off Operation Allows Fine Tuning Of Chassis Unloading During Stop Close And Power Application During Stop Opening.
    • Centered openings for best repeatability.
    • Corrosion resistant stainless steel and brass construction used on most surfaces coming into contact with air and fuel.
    • Low profile, stands 1 5/8 (1.625) inches tall below the carburetor. Hood clearance is typically not an issue with this stop.
    (0 reviews)
    $1,353.27 Add to cart
  • THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (SINGLE ACTING)
    • THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (SINGLE ACTING)
    • THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (SINGLE ACTING)
    Throttle Stop

    THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (SINGLE ACTING)

    THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (SINGLE ACTING)

    • Fits Holley Dominator (4500 style) and King Demon carburetors.
    • The Quality of a Dedenbear Bear Stop is obvious. Self-compensating for wear, regardless of age. 1pc aluminum casting prevents vacuum leaks, misalignment, distortion or loose parts commonly foun in welded or bolted together throttle stops
    • Indexed stop bolt makes adjustments simple, precise and repeatable.
    • Single acting CO2 actuation provides precise tuning of stop open rate to allow for consistent transition from stop close to stop open during a run and bring the power back on smoothly.
    • Stainless steel butterflies are bolted to a ground stainless steel shaft actuated by levers which are TIG welded to the throttle shaft, preventing any possibility of loosening.
    • Optional primary butterfly kits, sold separately, allow for even greater control in high horsepower applications by allowing the stop to control air/fuel flow on all four barrels.
    (0 reviews)
    $920.77 Add to cart