PRODUCTS & CATALOGS
Showing 3997–4023 of 4045 results
-
PRODUCTS & CATALOGSTJ/LJ 3.5 Inch Superflex Adj Up/ Fix Lwr
- 3.5In Lift
- TJ/LJ Short Arm Kit
- Front And Rear Tuned Coils
- Front Adjustable Track-Bar
- Adjustable Upper Arms
- Fixed Lower Arms
- Pt-Meg Super -Ride Bushings
- Stainless Brake Lines
- Quick Disconnects
(0 reviews) -
PRODUCTS & CATALOGSTPS Adapter Harness LS Sensor to Old Harness
This TPS adapter adapts a newer TPS from the LS Engine Series to older TPI TPS connectors that are found on the EZ 1.0.
- Has Female Metripack to go to Newer LS series TPS (54020).
(0 reviews) -
-
PRODUCTS & CATALOGS
Track Bar Bracket Rear TJ W/CV Driveshaft 3.0″-5.5
- Fits 1997 To 2006 TJ Wrangler, Rubicon And Unlimited With C/V Drive Shaft
- For Lifts Heights From 3″ To 5.5″ Tall
- Designed For Rear Pinion Angle.
(0 reviews) -
PRODUCTS & CATALOGS
TRC-2 Timing Retard Control
Retard the timing up to 20?. Easily connects to any E6 or I6 Ignition Controls. Use as a step retard to activate with nitrous. Will retard the timing in a ratio as boost pressure increases. Dial-back the timing in times of detonation.
(0 reviews) -
-
PRODUCTS & CATALOGS
Turbo Kit Option – A/C Modification – ALP.07 X / 22 Kit A/C Compressor Exchange
Turbo Kit Option – A/C Modification – ALP.07 X / 22 Kit A/C Compressor Exchange
(0 reviews) -
PRODUCTS & CATALOGS
Turbo Kit Option – A/C Modification – ALP.22 Kit New A/C Compressor, no exchange
A/C Modification For ALPHA X and ALPHA 22 Turbo Kit. Using A New Compressor.
(0 reviews) -
PRODUCTS & CATALOGS
Uniball Full Service Kit – 1 Arm – Fits BDS Control Arm Only – Ford Bronco (21-22)
Service Kit: 1.25 Uniball (1) Full Service Kit (Includes Uniball| Snap Ring| Cap| and Misalignments); Ford 123254
- UCAs use FK uniball bearings for maximum strength and travel
- Bearing features a PTFE liner to smooth and quiet operation
- Includes one uniball ball joint misalignment spacers snap ring and dust cap cover
- Sold Individually
(0 reviews) -
PRODUCTS & CATALOGS
Uniball Service Kit – 1 Arm – Fits BDS Control Arm Only – Ford Bronco (21-22)
Service Kit: 1.25 Uniball (1) Service Kit (Includes Uniball and Snap Ring); Ford 123254
- UCAs use FK uniball bearings for maximum strength and travel
- Bearing features a PTFE liner to smooth and quiet operation
- Includes one uniball ball joint and snap ring
- Sold Individually
(0 reviews) -
-
PRODUCTS & CATALOGS
Upper Steering Knuckle Gusset
- Reinforces inner knuckle on axle housing
- Attaches directly to front axle tube and inner steering knuckle
- Mild steel 5/8 in.
(0 reviews) -
PRODUCTS & CATALOGS
Valve Timing Control (VTC) Module for Ford 5.0 Coyote
The FAST Valve Timing (VTC) Module provides a plug-and-play interface between the Ford 5.0 Coyote's phaseable camshafts, FAST XFI and FAST XIM Ignition module. This module allows for the independent control of the Coyote's camshafts.
- Intake & exhaust cam position are separately tunable through C-Com software.
- Customers no longer need to install mechanical locking devices on all 4 cams when switching to FAST EFI.
- Plug & play interface between the engine, FAST XFI and XIM.
(0 reviews) -
-
PRODUCTS & CATALOGS
WATER HEADER, BIG BLOCK CHEVY
Fits Big Block Chevy
- Fits Big Block Chevy
- Exclusive design permits the utilization of alternators or belt driven fuel pumps without water pump interference.
- Tall, arched shape allows removal of the cam cover and camshaft without disconnecting the cooling system.
- Dual 3/4″ NPT ports allow for coolant feed from either side of the engine.
- Designed to distribute coolant equally into both sides of the engine.
- Top mounted 1/2″ NPT port readily accepts items such as a temperature gauge sensor, switch, or pressure tap.
- Designed together with Dedenbear WP3 water pumps to perform as an engineered cooling system.
- Compatible with many other types of remote mounted racing water pumps.
(0 reviews) -
PRODUCTS & CATALOGS
WATER HEADER, SMALL BLOCK CHEVY
Fits Small Block Chevy
- Fits Small Block Chevy
- Exclusive design permits the utilization of alternators or belt driven fuel pumps without water pump interference.
- Tall, arched shape allows removal of the cam cover and camshaft without disconnecting the cooling system.
- Dual 3/4″ NPT ports allow for coolant feed from either side of the engine.
- Designed to distribute coolant equally into both sides of the engine.
- Top mounted 1/2″ NPT port readily accepts items such as a temperature gauge sensor, switch, or pressure tap.
- Designed together with Dedenbear WP3 water pumps to perform as an engineered cooling system.
- Compatible with many other types of remote mounted racing water pumps.
(0 reviews) -
PRODUCTS & CATALOGS
WATER PUMP, ELECTRIC, ENGINE MOUNTED, BIG BLOCK CHEVY
Fits Big Block Chevy
- Fits Big Block Chevy
- Ideally suited for use in dragsters and vehicles with minimal radiator clearance.
- Unique, 3 in 1 outlet accepts all popular hose designs: 1.75″ , 1.25″ , or 1″ NPT for AN fittings.
- 12 and 16 volt compatible
- Tested up to 250 Degrees F (121 Degrees C) and 30 PSI (2.07 BAR).
- Designed to clear belt drive camshafts.
- Premium quality, custom built motor features ball bearings, high temperature armature windings, and a stainless steel shaft.
- One piece aluminum casting, single gasket design, and custom shaft seal ensure leak free performance.
- Best in class performance – Weighs just 4 pounds, stands 5 inches off the front of the engine block and requires only 3.5 amps of current (at 12 Volts) to operate.
(0 reviews) -
PRODUCTS & CATALOGS
WATER PUMP, ELECTRIC, ENGINE MOUNTED, SMALL BLOCK CHEVY
Fits Small Block Chevy
- Fits Small Block Chevy
- Ideally suited for use in dragsters and vehicles with minimal radiator clearance.
- Unique, 3 in 1 outlet accepts all popular hose designs: 1.75″ , 1.25″ , or 1″ NPT for AN fittings.
- 12 and 16 volt compatible
- Tested up to 250 Degrees F (121 Degrees C) and 30 PSI (2.07 BAR).
- Designed to clear belt drive camshafts.
- Premium quality, custom built motor features ball bearings, high temperature armature windings, and a stainless steel shaft.
- One piece aluminum casting, single gasket design, and custom shaft seal ensure leak free performance.
- Best in class performance – Weighs just 4 pounds, stands 5 inches off the front of the engine block and requires only 3.5 amps of current (at 12 Volts) to operate.
(0 reviews) -
PRODUCTS & CATALOGS
WATER PUMP, ELECTRIC, REMOTE MOUNTED, UNIVERSAL APPLICATION
Weighs just 3.25 pounds, is 7.5" long and 3.5" in diameter and requires only 3.5 amps of current (at 12 Volts) to operate.
- Weighs just 3.25 pounds, is 7.5″ long and 3.5″ in diameter and requires only 3.5 amps of current (at 12 Volts) to operate.
- Inlet accepts either 1.25″ hose or 3/4″ NPT. Outlet is 3/4″ NPT.
- 12 and 16 volt compatible
- Tested up to 250 Degrees F (121 Degrees C) and 30 PSI (2.07 BAR).
- Premium quality, custom built motor features ball bearings, high temperature armature windings, and a stainless steel shaft.
- One piece aluminum casting, single gasket design, and custom shaft seal ensure leak free performance.
- Includes air purge valve for easy cooling system bleeding.
(0 reviews) -
PRODUCTS & CATALOGS
Watts Link, Body Mount, Rod Ends, Adjustable Axle Clamps
The WL330 is 100-percent bolt-in and requires no cutting or modifying of the third-Gen GM F-Body chassis. The Watts link is adjustable, allowing for fine-tuning and the bind-free suspension articulation needed for superior handling.
(0 reviews) -
PRODUCTS & CATALOGS
Weatherpack Professional Crimp Tool
Use this tool to make the best weatherpack crimps for your wiring project.
(0 reviews) -
PRODUCTS & CATALOGS
Weld On Extended Sway Bar Mount
- Relocation tab raises swaybar mount 2.0 in. on axle
- Attaches directly to front axle housing
- Heavy gauge steel
- Includes gusset
- Bare metal
- Weld-on
(0 reviews) -
PRODUCTS & CATALOGS
Weld-In Oxygen Sensor Bung
This bung allows for the installation of an Oxygen sensor into your exhaust system.
(0 reviews) -
PRODUCTS & CATALOGS
Whipple Stage 1 750 HP Supercharger
- Compatible with 2018-2022 Mustang GT.
- 750 horsepower / 615 lb-ft torque with 93 octane fuel.
- Generation 5 – 3.0L twin screw supercharger.
- 4.00″ supercharger pulley.
- Utilizes factory 80mm throttle body and fuel pump.
- 55 lb. fuel injectors.
- Includes Whipple Tomahawk handheld programmer.
- 100,000 mile service interval.
- Optional 3 year/36,000 mile warranty available from Whipple Superchargers.
- Wrinkle black finish.
- 50-state legal- EO D231-76 (18-21 ONLY).
- Power numbers are quoted with 93 octane under ideal conditions, actual results may vary depending on conditions and testing procedures. 91 octane testing will always result in lower power numbers.
(0 reviews)
