Ignition
Showing 109–135 of 419 results
-
Ignition CoilE92 Performance Coil
The E92 features the more efficient E-Core Construction
(0 reviews) -
Ignition CoilE93 Racing Coil
E93 Racing Coil is designed for use with E7 Ignition Control or E6 Ignitions in Racing Applications.
(0 reviews) -
Ignition Harness
Early Buick V6 Ignition Adapter
Use this adapter to adapt XFI 2.0 to 86 to 87 Grand National & 86 to 87 T Type Buick and 89 Pontiac TTA ignition devices.
(0 reviews) -
-
Ignition Harness
EZ LS Ignition Kit for 24X and 58X reluctor LS Series Engines.
This EZ LS is a simple, all-inclusive kit for tuning the ignition of an LS Series coil near plug engine. This EZ LS kit include a simplified harness that allows for stock cam and crank sensors.
- Complete control over the ignition timing on Gen 3 and 4 LS series engines using a FAST EFI system
- Easy installation with plug-and-play wiring harness
- Recognizes 24x or 58x crankshaft sensors
- Tune through the EZ-EFI 2.0 hand-held or with the XFI C-Com software of an XFI 2.0 or XFI Sportsman EFI system
- Built-in LEDs indicate operation and input/output signals
- Clean, simplified installation with a compact, waterproof ignition controller
(0 reviews) -
-
-
-
Ignition Harness
FAST Ford TFI Adapter Connectors for Ford TFI distributors
FAST's Thick Film Ignition Adapter kit contains the connectors, terminals and seals needed to adapt to a Ford TFI ignition device.
(0 reviews) -
Single Lead Spark Coil Wire
FireWire 10″ HEI Coil Wire
This 10" FireWire is terminated with 90 degree HEI boots.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Single Lead Spark Coil Wire
FireWire 40″ Coil Wire Kit
This wire locks onto FAST I91 and E92 coils. Comes complete with a socket style and spark plug style terminal for unterminated end of wire.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
FireWire 45 Degree Cut-To-Fit Wireset for LS Coils w/ Heat Sleeve
Ideal for engine swaps and custom valve covers, these cut-to-fit LS coil wires feature pre-terminated coil terminals with loose 90 degree spark terminals and boots that allow the builder to choose wire lengths that best fit their needs.
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- 9mm core delivers the highest possible energy to the spark plug
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Reactive core reduces EMI interference
- Silicone boots resist cracking in high heat environment.
- Heat shrink secures Heat Sleeve at boots.
(0 reviews) -
Spark Plug Wire Set
Firewire 8 Cyl Cut-To-Fit Wireset Kit w/ Heat Sleeve
Kit contains 8 wires. Distributor Terminal is HEI/Socket. Spark plug boots are 45 degrees. Wrapped in Heat Sleeve.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
(0 reviews) -
Spark Plug Wire Set
Firewire 8 Cyl Cut-To-Fit Wireset Kit w/ Heat Sleeve
Kit contains 8 wires. Distributor Terminal is HEI/Socket. Spark plug boots are straight. Wrapped in Heat Sleeve.
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
(0 reviews) -
Spark Plug Wire Set
Firewire 8 Cyl Cut-To-Fit Wireset Kit w/ Heat Sleeve
Kit contains 8 wires. Distributor Terminal is HEI/Socket. Spark plug boots are 90 degrees. Wrapped in Heat Sleeve.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
(0 reviews) -
Spark Plug Wire Set
FireWire 90 Degree Cut-To-Fit Wireset for LS Coils w/ Heat Sleeve
Ideal for engine swaps and custom valve covers, these cut-to-fit LS coil wires feature pre-terminated coil terminals with loose 45 degree spark terminals and boots that allow the builder to choose wire lengths that best fit their needs.
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- 9mm core delivers the highest possible energy to the spark plug.
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit.
- Reactive core reduces EMI interference.
- Silicone boots resist cracking in high heat environment.
- Heat shrink secures Heat Sleeve at boots.
(0 reviews) -
Spark Plug Wire Set
Firewire Big Block Chevrolet Under-Header Wireset with Heat Sleeve
Kit contains 8 wires. Distributor Terminal is HEI. Spark plug boots are 90 degrees. Wrapped in Heat Sleeve.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
(0 reviews) -
Spark Plug Wire Set
Firewire Chevrolet Big Block Under-Header Cover Wireset
Kit contains 8 wires. Distributor terminal is HEI. Spark Plug Terminals are 90 Degrees.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Cut-To-Fit 4 Cylinder Wireset
Kit contains 4 wires. Distributor terminal is HEI/Socket. Spark plug terminals are straight.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Cut-To-Fit 6 Cylinder Wireset
Kit contains 6 wires. Distributor terminal is HEI/Socket. Spark plug terminals are straight.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Cut-To-Fit 8 Cylinder Wireset
Kit contains 8 wires. Distributor terminal is HEI/Socket. Spark plug terminals are 90 Degrees.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Cut-To-Fit 8 Cylinder Wireset
Kit contains 8 wires. Distributor terminal is HEI/Socket. Spark plug terminals are 45 Degrees.
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
(0 reviews) -
Spark Plug Wire Set
Firewire Cut-To-Fit 8 Cylinder Wireset
Kit contains 8 wires. Distributor terminal is HEI/Socket. Spark plug terminals are straight.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Ford 351 Windsor Wireset
Kit contains 8 wires. Distributor terminal is HEI Style. Spark Plug Terminals are 45 degrees.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550 Degrees Fahrenheit for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
(0 reviews) -
Spark Plug Wire Set
Firewire Ford 351 Windsor Wireset with Heat Sleeve
Kit contains 8 wires. Distributor Terminal is HEI-Style. Spark Plug boots are 45 degrees.
- The lowest resistance wire available with only 25 ohms per foot
- Extreme suppression capabilities prevent electronic interference
- Low resistance means more spark energy reaches the spark plugs
- Silicone plug boots handle 550?F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
(0 reviews)
