Driveline and Axles
Showing 28–54 of 263 results
-
DifferentialAuburn Gear – CHRYSLER 9.25″,2.71&UP,31T,84-PRES (HP-Series)
HP Limited Slip Diff for CHRYSLER 9.25",2.71&UP,31T,84-PRES (HP-Series)
- 31 Teeth, 12 Bolt, 2.71 & Up Ratios
- Auburn Gear’s Flagship limited-slip differential gives you smooth torque-sensing operation with the correct bias ratios to outperform the competition.
- Provides maximum amount of torque transfer without compromising the performance requirements of a vehicle in situations where torque transfer is not required.
- Product may vary from the Image shown due to your vehicles application.
(0 reviews) -
-
Differential Clutch Pack
Auburn Gear – Clutch Kit
Master ECTED MAX Rebuild Kit Limited Slip to Lock
(0 reviews) -
-
-
Differential
Auburn Gear – CORVETTE 10 BOLT, 2.41-3.70, 17T,63-79 (Pro-Series)
Pro Limted Slip Diff for CORVETTE 10 BOLT, 2.41-3.70, 17T,63-79 (Pro-Series)
- 17 Teeth, 10 Bolt, 2.41 – 3.70 Ratios
- Made in the USA for those who want to turn their Torque up another notch offering an even higher bias ratio and faster sensing reaction than HP Series for the very best controlled power transfer.
- High Bias Cone Clutch design provides High Torque & High Preload making it the Ultimate Slip Differential for true performance.
- Product may vary from the Image shown due to your vehicles application.
(0 reviews) -
Differential
Auburn Gear – CORVETTE 10 BOLT, 4.10&UP, 17T, 63-79 (Pro-Series)
Pro Limted Slip Diff for CORVETTE 10 BOLT, 4.10&UP, 17T, 63-79 (Pro-Series)
- 17 Teeth, 10 Bolt, 4.10 & Up Ratios
- Made in the USA for those who want to turn their Torque up another notch offering an even higher bias ratio and faster sensing reaction than HP Series for the very best controlled power transfer.
- High Bias Cone Clutch design provides High Torque & High Preload making it the Ultimate Slip Differential for true performance.
- Product may vary from the Image shown due to your vehicles application.
(0 reviews) -
-
-
Differential Cross Pin
Auburn Gear – Cross Pin
Master ECTED MAX Rebuild Kit Limited Slip to Lock
(0 reviews) -
-
Differential Ring and Pinion
Auburn Gear – DANA 30 Master Install Kit JK Front
DANA 30 Master Install Kit JK Front
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 30 Master Install Kit TJ
DANA 30 Master Install Kit TJ
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – Dana 30 R&P 4.88:1 Ratio, Reverse Cut, Front JK Non-Rubicon Models
Auburn Ring And Pinion for Dana 30 R&P 4.88:1 Ratio, Reverse Cut, Front JK Non-Rubicon Models
- 8620 HEAT Treated Material
- Quench Pressed
- Lap Matched
- 5 Cut
- Actual product may vary from image shown due to application
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit
DANA 44 Master Install Kit
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit
DANA 44 Master Install Kit
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit 1994 & Later Dodge Ram 1500/2500
DANA 44 Master Install Kit 1994 & Later Dodge Ram 1500/2500
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit JK Non-Rubicon Rear
DANA 44 Master Install Kit JK Non-Rubicon Rear
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit JK Rubicon Front
DANA 44 Master Install Kit JK Rubicon Front
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit JK Rubicon Rear
DANA 44 Master Install Kit JK Rubicon Rear
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 Master Install Kit TJ Rubicon Front & Rear
DANA 44 Master Install Kit TJ Rubicon Front & Rear
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 R&P, 4.88:1 Ratio, Thick, JK All Models
Auburn Ring And Pinion for DANA 44 R&P, 4.88:1 Ratio, Thick, JK All Models
- 8620 HEAT Treated Material
- Quench Pressed
- Lap Matched
- 5 Cut
- Actual product may vary from image shown due to application
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 44 R&P, 5.38:1 Ratio, REF OEM# 706017-8X
Auburn Ring And Pinion for DANA 44 R&P, 5.38:1 Ratio, REF OEM# 706017-8X
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 60 Master Install Kit 1968-1991 Chevy, 1959-1998 Dodge, 1960-1998 Ford
DANA 60 Master Install Kit 1968-1991 Chevy, 1959-1998 Dodge, 1960-1998 Ford
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 60 Master Install Kit Bearing Master Kit 1998 & Newer, Rear Only
DANA 60 Master Install Kit Bearing Master Kit 1998 & Newer, Rear Only
- Kit Contains TIMKEN Bearings
- Kit contains all Components for Install
- Auburn Gear differential master bearing kits save you the trouble of finding the bearings that you need for your differential and Ring & Pinion
- Plus the added benefit of receiving 8620 steel ring gear bolts, pinion shims, and carrier shims
- Make a the Right choice for your ring and pinion installation with Auburn Gear’s Master Installation Kits! ?
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 60 R&P 4.88:1 Ratio, REF OEM# 25334X
Auburn Ring And Pinion for DANA 60 R&P 4.88:1 Ratio, REF OEM# 25334X
(0 reviews) -
Differential Ring and Pinion
Auburn Gear – DANA 60 R&P 5.38:1 Ratio, REF OEM# 27518X
Auburn Ring And Pinion for DANA 60 R&P 5.38:1 Ratio, REF OEM# 27518X
(0 reviews)
