Air and Fuel Delivery
Showing 1675–1701 of 1731 results
-
Fuel Injector Terminal KitUSCAR/EV6 Injector to Minitimer/EV1 Injector Harness (1 Pack)
Allows for the adaption of an USCAR/EV6 Fuel Injector to a Minitimer/EV1harness commonly found on GM LS series engines and FAST EZ Fuel + Ignition Multiport harnesses.
- Does not require end-user to re-pin harness
- Includes adapter harness
- Plug and Play
(0 reviews) -
Fuel Injection HarnessVSS Harness
This harness allows you to connect a vehicle speed sensor or a driveshaft speed sensor to your XFI computer.
(0 reviews) -
Fuel Injection System
Weld-In Bung for EGT Sensors
This weld-in fitting allows for you to install 1/8" NPT EGT probes into your exhaust.
(0 reviews) -
-
Fuel Injection Harness
Wiring Harness, Fast 4-Cyl Fue L Injector
Injector Harness for 4 Cylinder
(0 reviews) -
-
Fuel Management Wiring Harness
Wiring Harness, Fast Main Dragster/Boat
XFI Main Harness designed with short leads to ease XFI installation into rear engine dragsters and boats which require shorter wires. This in turn typically will save the installer time on having to cut, strip and re-crimp leads.
(0 reviews) -
Fuel Injection System
XFI 2.0 Coyote Transplant Kit
Crate/Transplant Engine Fuel Injection Kit for Ford Coyote
(0 reviews) -
Fuel Injection System
XFI 2.0 GM LS1/6 Transplant Kit
Crate/Transplant Engine Fuel Injection Kit for GM LS1 and LS6 Engines
(0 reviews) -
Fuel Injection Harness
XFI 2.0 Main Harness for Ford Mustang Cobra Jet
This custom-fit engine wiring harness is designed to integrate the FAST XFI 2.0 and XIM with the factory vehicle harness and switch panel of the Ford Cobra Jet engine. Compatible with both the 5.4 Modular and 5.0 Coyote.
- Utilizes heavy-duty and heat-resistant cable for utmost in strength, durability.
- Several mounting options for ECU & ignition module.
- Compatible w/ Ford 5.4 Modular & 5.0 Coyote engines, either N/A or supercharged.
- No cutting or trimming required if installed as directed, saving 30-40 hours of harness-building labor.
- Used by both NHRA & NMCA Stock Eliminator & Super Stock teams.
(0 reviews) -
Fuel Injection System
XFI BBC Kit with 500HP Pump
This XFI 2.0 Kit comes with intake, fuel rails, injectors, air-only throttle body, inline fuel pump kit (500 HP) along with a fuel pressure regulator, dual sync distributor and XFI 2.0 ECU.
(0 reviews) -
Fuel Injection Harness
XFI Calibration Switch Kit
This kit includes a connector, a switch and instructions on how to toggle different tunes on your XFI from a switch.
- Toggle between different XFI 2.0 ECU tunes with a physical switch.
- Allows you to select different ECU programs without a laptop or hand-held.
- Brings convenient modern production car technology to select between custom tunes on the fly. Great for toggling different race configurations, de-tuned street confirgurations or even an RPM limited ‘Valet Mode’.
(0 reviews) -
Fuel Injection Harness
XFI CAN Retrofit Kit
This kit comes with a pre-built harness and control area network plug and receptacle (one male and one female) along with a terminating resistor set.. This allows you to add control area network devices to the XFI ECU.
(0 reviews) -
Fuel Injection Harness
XFI CAN Retrofit Kit
This kit comes with network plug and receptacle (one male and one female) along with a terminating resistor set. This allows you to add control area network devices to the XFI ECU.
(0 reviews) -
Fuel Injection Harness
XFI EFI 4 Cylinder
XFI Fuel Injection Harness equipped with Mintimer/EV1 connections and a harness designed to fit 4 cylinder engines with a user-defined firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for 4-7 Swap Firing Order Small Block Chevrolet, Big Block Chevrolet and LT1 Chevrolet engines.
XFI Fuel Injection Harness equipped with Minitimer/EV1 connections and a harness designed to fit 4/7 Swap Chevrolet Small and Big Block with a 1-8-7-3-6-5-4-2 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Buick V6 engines.
XFI Fuel Injection Harness equipped with Mintimer/EV1 connections and a harness designed to fit Buick V6 and other V6 engines with a 1-6-5-4-3-2 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Chrysler Modern 5.7L/6.1L/6.4L Hemi engines.
XFI Fuel Injection Harness equipped with USCAR/EV6 connections and a harness designed to fit Chrysler Modern 5.7L/6.1L/6.4L Hemi and other V8 engines with a 1-8-4-3-6-5-7-2 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Ford Coyote Series engines.
XFI Fuel Injection Harness equipped with USCAR/EV6 connections and a harness designed to fit Ford Coyote and other V8 engines with a 1-5-4-8-6-3-7-2 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Ford Modular Series engines.
XFI Fuel Injection Harness equipped with Minitimer/EV1 connections and a harness designed to fit Ford Modular and other V8 engines with a 1-3-7-2-6-5-4-8 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Ford Small Block, FE and Big Block engines.
XFI Fuel Injection Harness equipped with Minitimer/EV1 connections and a harness designed to fit Ford Small Block, FE and Big Block and other V8 engines with a 1-5-4-2-6-3-7-8 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for GM LS Series engines.
XFI Fuel Injection Harness equipped with Minitimer/EV1 connections and a harness designed to fit LS and other V8 engines with a 1-8-7-2-6-5-4-3 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for GM LS Series engines.
XFI Fuel Injection Harness equipped with USCAR/EV6 connections and a harness designed to fit LS series and other V8 engines with a 1-8-7-2-6-5-4-3 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Inector Harness for Small Block Chevrolet, Big Block Chevrolet and LT1 Chevrolet engines.
XFI Fuel Injection Harness equipped with Minitimer/EV1 connections and a harness designed to fit most Chevrolet Small and Big Block and Chrysler LA, B and RB engines with a 1-8-4-3-6-5-7-2 firing order.
(0 reviews) -
Fuel Injection Harness
XFI Fuel Injector Y Adapter Harness for Multiple Injectors
XFI Fuel Injection Y Adapter for Multiple Injector Applications
(0 reviews) -
Fuel Management Wiring Harness
XFI Harness designed for engines whose sensors feature GM LT1 style sensors.
XFI Main Harness 301101 is great for conversions from carburetor to fuel injection or existing LT-1 based projects. Terminals are generally LT-1 based.
(0 reviews) -
Fuel Management Wiring Harness
XFI Harness designed for engines whose sensors feature GM TPI style sensors.
XFI Main Harness 301100 fits GM TPI or weatherpack style sensors.
(0 reviews)
