Air and Fuel Delivery
Showing 1405–1431 of 1731 results
-
Carbon Dioxide Tank and Installation KitCO2 BOTTLE WITH VALVE, 2.5 POUND CAPACITY
- Includes 2.5 lb. CO2 bottle and valve only.
(0 reviews) -
Throttle Stop Retrofit KitCO2 RETROFIT KIT FOR TS1 THROTTLE STOP (DOUBLE ACTING)
CO2 RETROFIT KIT FOR TS1 THROTTLE STOP (DOUBLE ACTING)
- Convert your Dedenbear TS1 Bear Stop electric stop to dual acting CO2 actuation with this complete kit.
- Dual Acting Co2 Air On / Air Off Actuation Provides Precise Tunability Of Stop Close And Open Rates To Allow For Smooth And Consistent Transitions Onto And Off Of The Stop During A Run.
- Includes cylinder, remote solenoid pack, and needle valve adjusters.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS1 THROTTLE STOP (SINGLE ACTING)
CO2 RETROFIT KIT FOR TS1 THROTTLE STOP (SINGLE ACTING)
- Convert your Dedenbear TS1 Bear Stop electric stop to single acting CO2 actuation with this complete kit.
- Single acting CO2 actuation provides precise tuning of stop open rate to allow for consistent transition from stop close to stop open during a run and bring the power back on smoothly.
- Includes cylinder, solenoid, and needle valve adjuster.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS1, INCLUDES AB10K BOTTLE KIT (DOUBLE ACTING)
CO2 RETROFIT KIT FOR TS1, INCLUDES AB10K BOTTLE KIT (DOUBLE ACTING)
- Convert your Dedenbear TS1 Bear Stop electric stop to dual acting CO2 actuation with this complete kit.
- Includes cylinder, remote solenoid pack, needle valve adjusters, and AB10K air bottle kit.
- Dual Acting Co2 Air On / Air Off Actuation Provides Precise Tunability Of Stop Close And Open Rates To Allow For Smooth And Consistent Transitions Onto And Off Of The Stop During A Run.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS1, INCLUDES AB10K BOTTLE KIT (SINGLE ACTING)
CO2 RETROFIT KIT FOR TS1, INCLUDES AB10K BOTTLE KIT (SINGLE ACTING)
- Convert your Dedenbear TS1 Bear Stop electric stop to single acting CO2 actuation with this complete kit.
- Includes cylinder, solenoid, needle valve adjuster and AB10K air bottle kit.
- Single acting CO2 actuation provides precise tuning of stop open rate to allow for consistent transition from stop close to stop open during a run and bring the power back on smoothly.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS2 & TS5 THROTTLE STOPS (DOUBLE ACTING)
CO2 RETROFIT KIT FOR TS2 & TS5 THROTTLE STOPS (DOUBLE ACTING)
- Convert your Dedenbear Big Bore TS5 Bear Stop electric stop to dual acting CO2 actuation with this complete kit.
- Dual Acting Co2 Air On / Air Off Actuation Provides Precise Tunability Of Stop Close And Open Rates To Allow For Smooth And Consistent Transitions Onto And Off Of The Stop During A Run.
- Includes cylinder, remote solenoid pack, and needle valve adjusters.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS2 & TS5 THROTTLE STOPS (SINGLE ACTING)
CO2 RETROFIT KIT FOR TS2 & TS5 THROTTLE STOPS (SINGLE ACTING)
- Convert your Dedenbear Big Bore TS5 Bear Stop electric stop to single acting CO2 actuation with this complete kit.
- Single acting CO2 actuation provides precise tuning of stop open rate to allow for consistent transition from stop close to stop open during a run and bring the power back on smoothly.
- Includes cylinder, solenoid, and needle valve adjuster.
(0 reviews) -
Throttle Stop Retrofit Kit
CO2 RETROFIT KIT FOR TS2 & TS5, INCLUDES AB10K BOTTLE KIT (SINGLE ACTING)
CO2 RETROFIT KIT FOR TS2 & TS5, INCLUDES AB10K BOTTLE KIT (SINGLE ACTING)
- Convert your Dedenbear Big Bore TS5 Bear Stop electric stop to single acting CO2 actuation with this complete kit.
- Includes cylinder, solenoid, needle valve adjuster and AB10K air bottle kit.
- Single acting CO2 actuation provides precise tuning of stop open rate to allow for consistent transition from stop close to stop open during a run and bring the power back on smoothly.
(0 reviews) -
Fuel Injection Air Flow Meter
Communication Cable for 170536 Kit
This cable replaces the communication cable in the 170536 A/F RPM Module
(0 reviews) -
Fuel Injection Harness
Connector Kit Only, Fast Fuel/ Oil Psi
Kit comes with just the connectors, terminals seals to enable you to build the custom harness to fit your project.
(0 reviews) -
Fuel Injection Harness
Connector Kit-Fan and Fuel Pump
This connector kit gives you the terminals, connectors, and seals needed to construct a harness to allow the XFI to control your electric fuel pump and electric fan.
(0 reviews) -
Fuel Injection Harness
Connectors for VSS or Traction Control
This connector kit allows you to connect a vehicle speed sensor or a driveshaft speed sensor to your XFI computer.
(0 reviews) -
Fuel Injector Terminal Kit
Denso Fuel Injector Adapter Harness
This fuel injector adapter harness adapts the FAST 32107 242 Lb/Hr LS3 Fuel Injector to a non-Denso fuel injector harness. Kit includes one pre-assembled adapter with pigtail. Requires user to terminate pigtail to injector harness.
(0 reviews) -
Fuel Injector Terminal Kit
Denso Fuel Injector Adapter Harness – Set of 8
These fuel injector adapter harnesses adapt FAST 32107 242 Lb/Hr LS3 Fuel Injectors to a non-Denso fuel injector harness. Kit includes eight pre-assembled adapters with pigtails. Requires user to terminate pigtails to injector harness.
(0 reviews) -
Fuel Injector Terminal Kit
Denso Fuel Injector Connector
requires user to terminate harness.
(0 reviews) -
Fuel Injector Terminal Kit
Denso Fuel Injector Connector – Set of 8
requires user to terminate harness.
(0 reviews) -
-
-
Fuel Injection Air Flow Meter
Dual Sensor Upgrade Kit
This conversion kit includes everything you need to convert your single O2 Sensor A/F Meter to a Dual O2 Sensor A/F Meter.
(0 reviews) -
-
-
Fuel Injection Harness
Early IAC to Newer Titleign EFI Harness Adapter
This adapter connects an older IAC with a 2×2 weatherpack connection to a later model EFI harness that uses a Metripack/LS connection such as our EZ 2.0 or XFI Sportsman
(0 reviews) -
Fuel Injection Harness
Early MAP Sensor to Newer Titleign EFI Harness Adapter
This adapter pigtail with 3 Male Weatherpack terminals adapts an older MAP sensor with 3 Female Weatherpack Terminals to a newer Metripack/LS style harness.
- Adapts older sensors like our 307007 to a modern connection like what’s on a 307029
(0 reviews) -
Fuel Pump and Sender Assembly
EFI Fuel Sump Kit
The FAST EFI Sump Kit eliminates the major headache associated with retro-fit EFI installations: changing fuel pumps. The EFI Fuel Sump Kit includes an EFI pump, regulator, fuel cell and wiring required to prepare your fuel system for EFI.
(0 reviews) -
Fuel Pump Complete Kit
EFI In-Tank Fuel Pump Kit
This EFI Pump kit is perfect for completely plumbing your EFI system. Complete with 25 feet of fuel injection rated hose, an adjustable billet fuel pressure regulator, all the fittings and even a relay harness.
(0 reviews) -
Fuel Pump Complete Kit
EFI Inline Fuel Pump Kit
This EFI Pump kit is perfect for completely plumbing your EFI system. Complete with an adjustable billet fuel pressure regulator, and a relay harness, FAST has your next EFI project covered.
- Perfect for Inline EFI projects
- Includes Inline fuel pump supporting up to 550 HP
(0 reviews) -
Fuel Injection System
EGT Plug will seal EGT bung when not in use.
These EGT Fitting caps are designed to seal off EGT bungs when not in use.
(0 reviews)
