Home > Shop > THROTTLE STOP, LINKAGE STYLE, CO2, UNIVERSAL APPLICATION
THROTTLE STOP, LINKAGE STYLE, CO2, UNIVERSAL APPLICATION

THROTTLE STOP, LINKAGE STYLE, CO2, UNIVERSAL APPLICATION

Code: BGWS-TS10

THROTTLE STOP, LINKAGE STYLE, CO2, UNIVERSAL APPLICATION

  • Linkage Stop: 3/4 in. bore, 2 in. Stroke.
  • Adjustable needle valve allows precise and quick control of the opening rate of the stop.
  • Adapters for 10-32 and 1/4-28 threaded throttle cables and linkages included as standard.
  • 1/4 in. Quick Disconnect CO2 fitting

$327.79

In Stock
1-4 days Delivery
100% Original and quality
Extended Warranty
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The Dedenbear TS10 is an economical general purpose CO2 operated in-line linkage stop for carbs or injectors. The 3/4 inch bore and 2 inch stroke work well with single carb or throttle body injectors. Chromoly adjustment bolts ensure maximum durability. All Dedenbear linkage style throttle stops come with a needle valve to control the opening rate of the stop, quick disconnect fittings, stainless steel solenoid & cylinder, high temperature seals and plated steel parts for corrosion resistance.

Additional Attributes:

GTIN: 00046074165061
Add-On: AB10K;L1;L2;CC3;TSC2A;TS10K;TS15;TS20;TS25;TS30;TS40;2163;BEX-5000;2159;2172;2183
Prop 65 – Short Label: Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov.
Prop 65 – Warning Label: Warning.png
Prop 65 (C, R or CR): C
Prop 65 Yes/No: Y

Extended Information:

Emissions : Released
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 6 x 12 x 4 inches
Weight: 1.6 PG

PDF:

Additional information

Weight 0.73 kg
Dimensions 6 × 12 × 4 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

  • THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, STD. HOLLEY 4150
    Throttle Stop

    THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, STD. HOLLEY 4150

    THROTTLE STOP, BASEPLATE STYLE, ELECTRIC SOLENOID, STD. HOLLEY 4150

    • Fits Standard Holley (4150 style) and Demon carburetors
    • The Quality of a Dedenbear Bear Stop is obvious. Self-compensating for wear, regardless of age. 1pc aluminum casting prevents vacuum leaks, misalignment, distortion or loose parts commonly foun in welded or bolted together throttle stops
    • Indexed stop bolt makes adjustments simple, precise and repeatable.
    • All electrical components are self-contained within the sealed, one-piece solenoid which opens and closes instantaneously, yet draws only 1 amp at wide open throttle!
    • Stainless steel butterflies are bolted to a ground stainless steel shaft actuated by levers which are TIG welded to the throttle shaft, preventing any possibility of loosening.
    • Optional primary butterfly kits, sold separately, allow for even greater control in high horsepower applications by allowing the stop to control air/fuel flow on all four barrels.
    (0 reviews)
    $697.54 Add to cart
  • THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (DOUBLE ACTING)
    Throttle Stop

    THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (DOUBLE ACTING)

    THROTTLE STOP, BASEPLATE STYLE, CO2 ACTUATED, DOM. HOLLEY 4500 (DOUBLE ACTING)

    • Fits Holley Dominator (4500 style) and King Demon carburetors.
    • The Quality of a Dedenbear Bear Stop is obvious. Self-compensating for wear, regardless of age. 1pc aluminum casting prevents vacuum leaks, misalignment, distortion or loose parts commonly foun in welded or bolted together throttle stops
    • Indexed stop bolt makes adjustments simple, precise and repeatable.
    • Dual Acting Co2 Air On / Air Off Actuation Provides Precise Tunability Of Stop Close And Open Rates To Allow For Smooth And Consistent Transitions Onto And Off Of The Stop During A Run.
    • Stainless steel butterflies are bolted to a ground stainless steel shaft actuated by levers which are TIG welded to the throttle shaft, preventing any possibility of loosening.
    • Optional primary butterfly kits, sold separately, allow for even greater control in high horsepower applications by allowing the stop to control air/fuel flow on all four barrels.
    (0 reviews)
    $995.46 Add to cart